Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for SouthPark Homeowners
If you’ve watched water stain the inside of your firebox after a hard rain, the cap or crown is usually where it’s getting in. A chimney cap is the fitted cover over the top of the flue, and the crown is the masonry slab that slopes around it to shed water. In SouthPark’s rainy, humid climate, both take a beating, and a failing crown can let water soak into the brick and freeze in a cold snap. Our technicians have up to 8 years of experience with caps and crowns, and we install professional-grade components from brands we name openly. We answer 24/7, and same-day scheduling is often available for SouthPark homeowners. Call (855) 425-6201 for a free estimate.
What Our Chimney Cap & Crown Service Includes
Every piece of cap and crown work we do is a small, focused job with a clear purpose: keeping water and wildlife out of the flue and protecting the masonry that holds it together. We don’t cut corners to save on materials, and we don’t recommend replacement when a repair will last. Here’s what each part of the service covers.
Cap Installation
A chimney cap is the stainless or galvanized cover that sits on top of the flue, with a mesh screen to keep birds and animals out and a metal top to keep rain out. We install single-flue and custom caps using components from Olympia Chimney, Famco, and similar professional-grade manufacturers. If you have no cap at all, we measure the flue and fit a cap that’s correctly sized so it doesn’t rattle or blow off in high wind.

Cap Replacement
When a cap is rusted through, bent, or missing its screen, it stops doing its job: debris builds up inside the flue, water gets in, and a downdraft can push smoke back into the room. We remove the old cap and fit a new one matched to your flue size and chimney style. Replacement makes sense when the cap is beyond repair; a repairable cap gets repaired instead.

Crown Repair
The crown is the concrete or masonry surface at the very top of your chimney, shaped with a slope to shed water away from the flue. Cracks in the crown are common in our region and are one of the leading causes of water damage deep inside a chimney. We repair cracked crowns with a proper bonding technique and a flexible crown sealant that can move with the chimney as it heats and cools.

Crown Coating
Crown coating is a protective sealant applied over a damaged or aging crown to seal hairline cracks and add a flexible, weather-resistant layer without a full rebuild. We coat crowns that are cracked but still structurally sound, using a flexible compound that expands and contracts with the masonry. Coating is a lower-cost option than rebuilding when the crown is otherwise sound and just needs a renewed surface.
Multi-Flue Cap
Chimneys with more than one flue need a cap that covers all of them at once, and that’s a different piece of hardware than a single-flue cap. Multi-flue caps are built to fit the specific layout of your chimney top, with individual screens over each flue and a shared top to keep weather out. We fit and install multi-flue caps for chimneys that serve more than one appliance or fireplace.
Custom Cap
Some chimneys have unusual flue sizes, custom masonry tops, or architectural details that need a cap built to fit, not a stock size. We measure the chimney, order a custom-built cap in the metal finish you choose, and install it to fit correctly. Custom caps are a good option when a stock cap looks out of place on an older or architecturally distinctive home.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Work With for Chimney Cap & Crown
We install and service cap and crown products from a small roster of professional-grade manufacturers, so you know what’s going on top of your chimney rather than taking a generic parts-bin cap on faith. Olympia Chimney produces caps and vent components built for real-world weather, and we fit their multi-flue and single-flue caps regularly in SouthPark. Famco makes professional-grade caps and vents that aren’t typically available through retail channels, and we use their components when the fit calls for them. Copperfield is another manufacturer we work with for caps that need a more substantial finish, and DuraFlex flexible liner systems are the industry standard when a cap install overlaps with relining work. You can look up any of these brands independently before we install anything.
Whether your existing cap is an Olympia Chimney model, a Famco unit, or any other make, we can help. We know where these products wear out – rusted screens, stripped fasteners, cracked welds at the feet – and we can tell you whether a repair or a replacement is the right call. The same goes for the crown: we work with the masonry and sealant products that suit your chimney’s material and condition. If a cap or crown on your roof is a brand we haven’t named, that’s fine; the diagnosis is about the condition of the product, not the label on it.
Signs You Need Chimney Cap & Crown Right Now
- Water stains or rust inside the firebox or on the damper. A dark stain or rust line in the firebox after a rain is water getting past the cap or crown. Left alone, it rusts the damper and can soak the masonry around it.
- Visible cracks or crumbling at the top of the chimney. If you can see cracks in the crown from the ground with binoculars, or the concrete is spalling and flaking, water is already working its way in. A cracked crown is the single most common entry point for moisture.
- Missing or rusted cap, or a bent screen. A missing cap means birds, squirrels, and rain have open access to the flue. A rusted or bent screen lets animals in and can shed debris that blocks the flue.
- Smoke backing into the room or a smoky smell on damp days. A damaged cap or storm collar can cause a downdraft that pushes smoke down the flue and into the living space. That smoky smell on a rainy day is often the crown letting moisture in.
- Water dripping into the firebox. If you hear dripping or see water pooling at the base of the firebox during a storm, the cap or crown is the first thing to check. The fix is usually straightforward once the entry point is located.
Our Chimney Cap & Crown Process – Step by Step
- 1
We start with an inspection. Before any cap or crown work, we inspect the chimney from the firebox up and from the roof down. We use a camera for the flue and check the crown for cracks, the cap for condition, and the flashing where the chimney meets the roof.
- 2
We photograph and document what we find. You get a photo report of the crown, cap, and any damage we see, so you can see the problem yourself rather than taking our word for it. We don’t recommend work you can’t verify.
- 3
We write up an estimate and walk through the options. We give you a written estimate for the cap or crown work and explain what’s urgent and what can safely wait. If a repair will do the job, we tell you that rather than pushing a replacement.
- 4
We do the work. Cap installation, replacement, crown repair, or coating – all handled by our technicians with professional-grade materials. We protect the roof and clean up when we’re done.
- 5
We test and confirm. We check the seating and fastening of the cap, confirm the crown is sealed and shedding properly, and show you the finished work before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in SouthPark?
Chimney cap and crown work in SouthPark typically runs from about $250 to $1,800 depending on what your chimney needs. A standard single-flue cap installation is usually in the $250 to $650 range, and a multi-flue or custom-built cap tends to run $600 to $1,400 depending on the size and finish. Crown coating or a minor crown repair is often $300 to $800, and a full crown rebuild runs higher, usually $1,200 to $2,500 depending on how much masonry is involved. Custom or unusual chimney tops can push a cap install toward the upper end of that range.
What moves the price is the size and number of flues, whether the crown is cracked or crumbling, how accessible the chimney top is from the roof, and the material you choose for the cap. The most reliable way to avoid overpaying is to get the inspection and photo documentation first, then a written estimate that sets the final price – not a verbal number on the way to the truck. Our estimate is free, and the written estimate is what you pay; there’s no surprise line item later.
We don’t recommend work that can’t be backed up with evidence from the inspection, and we’ll tell you plainly when a cap or crown problem can wait a season. A chimney cap & crown service here should be about protecting the chimney and the home, not upselling you into work you don’t need.
Chimney Cap & Crown Near SouthPark – Our Service Area
We work with homeowners throughout SouthPark and the surrounding neighborhoods, including Elizabeth, Wesley Heights, Myers Park, Cotswold, Dilworth, and Sedgefield. Scheduling is straightforward: we give you a window, and same-day visits are often possible in the SouthPark area. If you’re in one of the nearby neighborhoods like Eastover or Quail Hollow, we can usually fit a cap and crown estimate into the same week. See our chimney sweep services for the full range of what we handle across the area.
Serving SouthPark, NC – Our Local Coverage Area
We serve SouthPark and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in SouthPark
A chimney cap is the cover and screen that sits over the top of your flue, and the crown is the sloped concrete surface around the base of the flue at the top of the chimney. The cap keeps rain, animals, and debris out of the flue, and the crown sheds water away from the masonry so it doesn’t soak in and freeze. Together they’re the weatherproofing layer at the top of your chimney, and when either one fails, water gets into places you don’t want it. Call (855) 425-6201 for a free estimate.
Most cap installations take an hour or two, while crown repairs and coatings can take half a day depending on the size of the chimney and the condition of the crown. A full crown rebuild takes longer. We give you a realistic time estimate when we book, and same-day scheduling is often available in SouthPark.
Cap work typically runs $250 to $1,400, and crown work runs about $300 to $2,500 for a full rebuild, with most jobs landing in the middle of those ranges. The final price depends on your flue count, the crown’s condition, and the material you choose. The written estimate sets the price, and the estimate is free. Call (855) 425-6201 for an exact quote.
Yes, we work on Olympia Chimney and Famco caps, along with other makes. We install these brands and we know where they tend to wear out, so we can recommend a repair or replacement based on what we find. Whether your cap is one of these brands or another, we can help.
Same-day scheduling is often available for cap and crown work in SouthPark. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. If you call outside dispatch hours, we book you into the next opening. Call (855) 425-6201.
We stand behind the work we do, and the specific warranty depends on the product and the job, so we’ll spell it out in your written estimate rather than promise something in a brochure. Ask us about the warranty on your specific cap or crown work when we do the estimate. Call (855) 425-6201 to set that up.
Clear access to the fireplace and the hearth, and make sure the damper is easy to reach. If your cap or crown is part of a larger inspection, note any symptoms you’ve seen – water stains, smoke backing up, a smoky smell on damp days – so we can check those spots first. Same-day scheduling is often available, and we answer 24/7.
Schedule Your Chimney Cap & Crown Service in SouthPark Today
Don’t wait for the next hard rain to find out your crown is cracked. Call (855) 425-6201 for a free, no-obligation estimate on chimney cap & crown work in SouthPark. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday gets a technician out to inspect the top of your chimney and give you a written, evidence-based estimate. We name the brands we use, we show you the photos, and we tell you honestly what can wait and what can’t. Call today to get on the schedule.
Written by the team at Chimney Sweep SouthPark.